Aluminium vs fibreglass

All topics related to fishing and angling in Victoria that don't fit into one of the other forum categories.
Nickkringle
Rank: Baitfish
Rank: Baitfish
Joined: Sun Apr 28, 2019 3:34 pm

Re: Aluminium vs fibreglass

Post by Nickkringle » Tue Apr 30, 2019 6:05 pm

Mattblack wrote:
Tue Apr 30, 2019 5:56 pm
You’ll get a smoother ride and less hassles with a tiller steer
Why's that? Just out of curiosity

User avatar
SteveoTheTiger
Rank: Premium Member
Rank: Premium Member
Joined: Sun Nov 18, 2012 12:40 pm
Location: Hoppers Crossing
Has liked: 182 times
Likes received: 166 times
Contact:

Re: Aluminium vs fibreglass

Post by SteveoTheTiger » Tue Apr 30, 2019 6:10 pm

Nick, i would probably go tiller steer in a boat that size. I havent owned a tinny with forward controls of that size, but i know anyone sitting in the front seat of my old tinny would be thrown around quite a lot in any chop. It was teeth rattling stuff.

The trailer doesnt look great, but it could still be fine. Make sure you check out that rust on the drawbar. The outboard is pretty much the same as my old one.. early 2000's Merc which i had no issues with at all but obviously make sure it is good to go too.
Nickkringle wrote:
Tue Apr 30, 2019 6:05 pm
Mattblack wrote:
Tue Apr 30, 2019 5:56 pm
You’ll get a smoother ride and less hassles with a tiller steer
Why's that? Just out of curiosity
My opinion here is that you will get a better ride sitting at the stern of the boat, which will take much less of a pounding. You will also get more deck space. And less issues with tiller steer as that boat most likely has a pulley system steering setup which i have never trusted in any of my boats.

Edit: actually another look at the photos and it does have cable steering, so that it a step in the right direction IMO.
The only thing better than serenity is a two stroke at full throttle!
Check out my Flickr Photostream

Nickkringle
Rank: Baitfish
Rank: Baitfish
Joined: Sun Apr 28, 2019 3:34 pm

Re: Aluminium vs fibreglass

Post by Nickkringle » Tue Apr 30, 2019 6:18 pm

Yea I'm dead against pulley steering I'd only have cable or hydraulic steering I've done a bit of research but too much to decide from

purple5ive
Rank: Premium Member
Rank: Premium Member
Joined: Thu Dec 08, 2011 1:59 pm
Has liked: 567 times
Likes received: 1011 times

Re: Aluminium vs fibreglass

Post by purple5ive » Tue Apr 30, 2019 6:32 pm

Mattblack wrote:
Tue Apr 30, 2019 5:56 pm
You’ll get a smoother ride and less hassles with a tiller steer
Smoother ride yes maybe because your sitting at the back.
But that's where it ends for me.

Most tiller steers look like they are attempting to launch into space while taking off. Let alone the fact you cant see **** in front of you at this given point in time is a bad idea specially in low light conditions.

They most certainly are the pick of the crop if you want cheap and as much space as possible.
Power tilt and trim on the tiller is definitely a way to make tillers a better boat

Nickkringle
Rank: Baitfish
Rank: Baitfish
Joined: Sun Apr 28, 2019 3:34 pm

Re: Aluminium vs fibreglass

Post by Nickkringle » Tue Apr 30, 2019 6:36 pm

https://www.gumtree.com.au/s-ad/sunshin ... 1215765642
That's the only decent tiller steer in my budget on gumtree

User avatar
bowl
Rank: Premium Member
Rank: Premium Member
Joined: Mon Nov 19, 2012 12:30 pm
Location: Wyndham Vale
Has liked: 292 times
Likes received: 559 times

Re: Aluminium vs fibreglass

Post by bowl » Tue Apr 30, 2019 6:42 pm

Nickkringle wrote:
Tue Apr 30, 2019 6:36 pm
https://www.gumtree.com.au/s-ad/sunshin ... 1215765642
That's the only decent tiller steer in my budget on gumtree
I had the same boat 410 fishermen...
Great boat..
To many boats kayak, helicopter , catch a fish,catch a fish

User avatar
bowl
Rank: Premium Member
Rank: Premium Member
Joined: Mon Nov 19, 2012 12:30 pm
Location: Wyndham Vale
Has liked: 292 times
Likes received: 559 times

Re: Aluminium vs fibreglass

Post by bowl » Tue Apr 30, 2019 6:44 pm

purple5ive wrote:
Tue Apr 30, 2019 6:32 pm
Mattblack wrote:
Tue Apr 30, 2019 5:56 pm
You’ll get a smoother ride and less hassles with a tiller steer
Smoother ride yes maybe because your sitting at the back.
But that's where it ends for me.

Most tiller steers look like they are attempting to launch into space while taking off. Let alone the fact you cant see **** in front of you at this given point in time is a bad idea specially in low light conditions.

They most certainly are the pick of the crop if you want cheap and as much space as possible.
Power tilt and trim on the tiller is definitely a way to make tillers a better boat
Its fine at 4.2 to see where ya going...
When tillers go over 4.5 its gets hard to see from my experience...my tiller had swivel seat init and you could see fine...
To many boats kayak, helicopter , catch a fish,catch a fish

User avatar
SteveoTheTiger
Rank: Premium Member
Rank: Premium Member
Joined: Sun Nov 18, 2012 12:40 pm
Location: Hoppers Crossing
Has liked: 182 times
Likes received: 166 times
Contact:

Re: Aluminium vs fibreglass

Post by SteveoTheTiger » Tue Apr 30, 2019 6:45 pm

Nickkringle wrote:
Tue Apr 30, 2019 6:36 pm
https://www.gumtree.com.au/s-ad/sunshin ... 1215765642
That's the only decent tiller steer in my budget on gumtree
I was in the same situation as you a few years back. I wanted to get back on the water and only had $6000 to spend. So i went with a Savage Kestral with a 25 Merc. It served me well until i was able to upgrade to something a little bigger.

If i was in your shoes i would be looking at something like this one, rather than the Quintrex.
The only thing better than serenity is a two stroke at full throttle!
Check out my Flickr Photostream

Mattblack
Rank: Gummy Shark
Rank: Gummy Shark
Joined: Tue Sep 06, 2016 1:08 pm
Location: South East Suburbs
Has liked: 625 times
Likes received: 298 times

Re: Aluminium vs fibreglass

Post by Mattblack » Tue Apr 30, 2019 7:21 pm

Nickkringle wrote:
Tue Apr 30, 2019 6:05 pm
Mattblack wrote:
Tue Apr 30, 2019 5:56 pm
You’ll get a smoother ride and less hassles with a tiller steer
Why's that? Just out of curiosity
Keep it simple & the less that can go wrong with it. Less weight will make a big difference in hole shot & overall speed. Easy to manually tilt the motor. Quicker turning. Keep the tank & the anchor up the front of the boat to even out the weight.

User avatar
bowl
Rank: Premium Member
Rank: Premium Member
Joined: Mon Nov 19, 2012 12:30 pm
Location: Wyndham Vale
Has liked: 292 times
Likes received: 559 times

Re: Aluminium vs fibreglass

Post by bowl » Thu Jun 06, 2019 7:22 pm

Get a boat yet?
To many boats kayak, helicopter , catch a fish,catch a fish

Post Reply

Return to “General”