Burley Pots for Boats

Post Reply
Bugatti

Burley Pots for Boats

Post by Bugatti » Wed May 22, 2019 1:37 am

Thought I'd start a thread on Burley Pots for Boats. What is everyone using to get the scented message out to all those fish out there ????

Firstly, I have my Burley pot rope on a large hand-line spool, it makes the rope easier to use.

i.jpg
i.jpg (10.38 KiB) Viewed 3250 times


I use a variety of Pots & methods. The simplest thing I use is a Scaling Bag for fish frames/bits.

Also I have made some PVC ones out of fixings & tube

a.PNG


And for that little bit more durable and open meshed , , , , some stainless steel ones. Note, in the square one, there is a lead ring hoop. This I made (and similar for the PVC Burley Pots) I made by cutting two different sized tin cans in half and nailing the halves together on a piece of wood, with the smaller diameter can inside the larger one. Then poured molten lead in the ring hoop gap. Careful as you need to pry the cans off the lead with a pair of pliers.

b.PNG

c.PNG


So, just wondering what everyone else is doing to get the berley out and the fish in :-D

Cheers, Bugatti

denis barden
Rank: Rainbow Trout
Rank: Rainbow Trout
Joined: Sat Jun 18, 2016 3:01 am
Location: St Leonards Vic
Likes received: 523 times

Re: Burley Pots for Boats

Post by denis barden » Wed May 22, 2019 4:28 am

Image
Berley is a round block of bran type and compressed Tuna Oil from Port Lincoln SA supplied by Marios bait at Geelong

Wolly Bugger
Moderator
Moderator
Joined: Sun Mar 06, 2011 5:25 pm
Has liked: 13 times
Likes received: 49 times

Re: Burley Pots for Boats

Post by Wolly Bugger » Wed May 22, 2019 8:38 am

This is what I use sometimes
Attachments
bomb.jpg
bomb.jpg (12.62 KiB) Viewed 3110 times

Bugatti

Re: Burley Pots for Boats

Post by Bugatti » Wed May 22, 2019 8:42 am

denis barden wrote:
Wed May 22, 2019 4:28 am
Image
Berley is a round block of bran type and compressed Tuna Oil from Port Lincoln SA supplied by Marios bait at Geelong

Denis, you never cease to amaze me. Awesome setup.

I love the Alvey "downrigger" idea, very simple, very effective, very "re-purposed", I would never have thought of coming up with that combination as an ingenious solution :thumbsup:

Love the "rubber sleeving" of the Alvey to the grab rail. Great for:
* Not marking the grab rail
* Not oxidising the grab rail from "dis-similar" metals
*AND giving good grip to the Alvey

I think you are the Honorary President of our "Tinkerers Association" :a_goodjob:

Cheers, Bill

fishnut
Rank: Bream
Rank: Bream
Joined: Sat Sep 20, 2014 6:42 pm
Location: Altona meadows
Has liked: 28 times
Likes received: 219 times

Re: Burley Pots for Boats

Post by fishnut » Wed May 22, 2019 9:59 am

Hey bugatti i have made the same things as u with pvc pipe,one smaller diameter for smaller pellets and one for larger things like burley blocks,but i have another tube inside which has holes in it as well and a strip taken out vertically so it fits in the outer one
That way i can regulate the amount of berley coming out by twisting it to make the flow of burley more or less

colnick
Rank: Cephalopod
Rank: Cephalopod
Joined: Thu Feb 28, 2013 7:30 pm
Has liked: 37 times
Likes received: 65 times

Re: Burley Pots for Boats

Post by colnick » Wed May 22, 2019 10:57 am

I like the star drag on Denis's Alvey set-up. When a seal grabs the berley pot and tries to make off with it you can wind up the drag and give him a bit of competition.

User avatar
Trumpeter
Rank: Premium Member
Rank: Premium Member
Joined: Fri Feb 20, 2015 9:37 pm
Location: Bellarine Peninsula
Has liked: 71 times
Likes received: 68 times

Re: Burley Pots for Boats

Post by Trumpeter » Wed May 22, 2019 11:58 am

I have a couple of lead cages I picked up cheaply when the Local Rays closed down. They're pretty good but need a bit of gutter mesh inside to reduce the hole size if I use pellets. I'd made a pvc job similar to yours Bugs but found it was a bit too buoyant in the current, even with a fair bit of lead in it, maybe it needed more holes...
Image

User avatar
Sebb
Rank: Premium Member
Rank: Premium Member
Joined: Mon Jun 13, 2016 3:30 pm
Has liked: 3001 times
Likes received: 1576 times

Re: Burley Pots for Boats

Post by Sebb » Wed May 22, 2019 4:30 pm

Onion bag with a rock or sinker in it. On yak though, not a boat. Not much spare space on a yak.
------------------------------
A fish is a fish :ft:
No fish is worth a life, stay safe

smile0784
Rank: Premium Member
Rank: Premium Member
Joined: Thu Apr 26, 2012 5:16 pm
Has liked: 39 times
Likes received: 356 times

Re: Burley Pots for Boats

Post by smile0784 » Wed May 22, 2019 7:16 pm

Keeper net on a rope

Post Reply

Return to “Other Fishing Equipment”