I have a few high quality gan craft jigs and on some of them the hooks are so badly rusted that they are useless. With rod tips it is easy to replace the tip, by heating the tip so that the glue melts and then pulling the old tip off and putting a new one on.
So as an experiment and seeing that the high quality jigs were useless as they were, I heated the barb area carefully, and managed to pull of the rusted barbs. if that had failed, I was going to try some acetone next.
Now all I need to do is find some barbs to put back on the high quality Gan Craft jigs and I will then have two more high quality jigs, with rust proof barbs.
GanCraft jigs
-
- Moderator
- Joined: Sun Mar 06, 2011 5:25 pm
- Has liked: 13 times
- Likes received: 49 times
-
- Rank: Premium Member
- Joined: Sun May 11, 2014 1:27 am
- Has liked: 15 times
- Likes received: 79 times
Re: GanCraft jigs
I fish fairly often on the squid and have an array of quality jigs for them. I have a number of gancraft jigs and find that the crowns begin rusting even prior to usage! I find them overrated and find other brands of jigs much more successful and of better construction
-
- Rank: Flathead
- Joined: Wed May 04, 2011 11:19 am
- Has liked: 63 times
- Likes received: 40 times
Re: GanCraft jigs
I think Rui sells replacement crowns. Its dissapointing that Gancraft crowns rust soo easily. I was told this and paid special attention to my gancraft jigs, They still rusted.
- ducky
- Rank: Premium Member
- Joined: Thu Feb 28, 2013 5:17 pm
- Has liked: 22 times
- Likes received: 332 times
Re: GanCraft jigs
Agreed with above. Better jigs can be had for less money. I've owned a few gancrafts and have never been a fan.