Lighting Upgrades

Rank: Cephalopod
Rank: Cephalopod
Posts: 117
Joined: Thu Oct 26, 2017 7:25 pm

Re: Lighting Upgrades

Post by Duffman » Mon Jan 15, 2018 5:56 pm

Yota wrote:No worries rb,
And if your rig is alloy make sure you check the silicone won’t react with the he hull. My boat is a fibreglass job so a good prep clean is all that was needed.
And you're right, if you wantto or have to, you can pull the blob of silicone away easily enough, but it does hold cabk s in place well.
I’d add photos but the file size of the photos on my phoneis too large.
Send the photos to yourself with MMS and they get compressed. Then save the photos from the message and upload those ones

Remove these ads.

denis barden
Rank: King George Whiting
Rank: King George Whiting
Posts: 552
Joined: Sat Jun 18, 2016 3:01 am

Re: Lighting Upgrades

Post by denis barden » Mon Jan 15, 2018 6:37 pm

If you are using the little square sticky backs-Put a dob of super glue on before sticking down-Never come off

Post Reply

Return to “Marine Electronics”