Page 2 of 2
Re: Lowrance gps/sonar installer
Posted: Tue Jun 12, 2018 9:16 pm
by Frankb
thank you all for the replies.
Yes I have an old sonar/ gps now (black and white) and I will use the same hole for the transducer cable.
I feel more confident now to do the job myself after reading all your advice.
Ps. Does anyone use this elite 7 ti and are you happy with it.
Thanks again everyone for your help.
Re: Lowrance gps/sonar installer
Posted: Tue Jun 12, 2018 10:11 pm
by purple5ive
give it a shot on your own mate, its not that hard at all.
use the older power wires and join into them if your not confident running it all the way to the busbar or isolator switch etc.
i had the elite ti7 and upgeaded to the elite ti9, they are both great units, as with most sounders, make sure you get the transducer absolutely spot on, otherwise you wont be getting good reading when going a bit faster than trolling speed.
Re: Lowrance gps/sonar installer
Posted: Wed Jun 13, 2018 6:31 am
by Frankb
Thanks purple5ive
Appreciate your advice.
Re: Lowrance gps/sonar installer
Posted: Wed Jun 13, 2018 7:23 am
by bowl
Re: Lowrance gps/sonar installer
Posted: Fri Jun 15, 2018 11:04 pm
by smile0784
Did you give it a try?
Re: Lowrance gps/sonar installer
Posted: Sun Jun 17, 2018 8:25 pm
by Frankb
Not yet smile0784
Busy at work.
Re: Lowrance gps/sonar installer
Posted: Sun Jun 17, 2018 9:49 pm
by smile0784
Work always gets in the way of us boys and our toys
Re: Lowrance gps/sonar installer
Posted: Mon Jun 18, 2018 7:52 am
by skouta
What about BL Marine in preston.
They stock Lowrance so they might install them as well?? Or they might put you on to someone who does.
BL Marine
612 - 614 Plenty Rd, Preston VIC 3072
Corner of Malpas Street
Ph: 03 9478 1420