Getting on with boat re-build

Lightningx
Bluefin
Bluefin
Joined: Wed Oct 01, 2014 4:21 pm
Has liked: 72 times
Likes received: 976 times

Re: Getting on with boat re-build

Post by Lightningx » Sun Aug 05, 2018 1:52 pm

Nice bolster seats Col I have the same ones in my boat. I like being able to tuck the front bit up and stand while driving, then while at anchor tuck it back out to become a nice comfortable seat. Looking good mate :thumbsup:

rb85
Rank: Premium Member
Rank: Premium Member
Joined: Thu Dec 08, 2016 8:08 pm
Location: The Ocean
Has liked: 412 times
Likes received: 609 times

Re: Getting on with boat re-build

Post by rb85 » Sun Aug 05, 2018 5:18 pm

https://ramfg.com.au/collections/budget ... e-seat-pod is this the pod Col looks good mate. Seat looks good ontop?

Thinking one of these for my boat on the drivers side and the passenger a stainless seat pedestal frame that you can slide an Esky under.

blacklab99
Rank: Premium Member
Rank: Premium Member
Joined: Mon Mar 11, 2013 2:41 pm
Location: malvern east
Has liked: 14 times
Likes received: 73 times

Re: Getting on with boat re-build

Post by blacklab99 » Sun Aug 05, 2018 6:02 pm

Hey rb,
Yeah, its similar to that one in the link, mine tappers it's smaller at the top.
Hey, I looked at those S/S frame types, but, the configuration of my boat, has a huge fishing space, but the cuddy is well forward and I don't have good fixing points underneath as It gets narrow quick, but I like the idea of sliding the esky underneath.
I'm putting tackle trays in one of mine and a storage area inside on the other, I may also sink a fire extinguisher in one as well.
There's plenty of options out there, you've just got to come up with what fit your needs,
And unfortunately your pocket !!!!!

Col

blacklab99
Rank: Premium Member
Rank: Premium Member
Joined: Mon Mar 11, 2013 2:41 pm
Location: malvern east
Has liked: 14 times
Likes received: 73 times

Re: Getting on with boat re-build

Post by blacklab99 » Sat Aug 11, 2018 2:52 pm

IMG_0975.JPG
Got a bit of time in over the last few days, decided to leave the flow coating for a few weeks till weather warms up and concentrate on getting the
Rocket launcher, bait board and newly re furbed windscreen installed.
I wasn't happy with the stainless plates of the bait board and rocket launcher clamped straight down on the fibre glass, all the surfaces weren't totally flat and even though it's covered and not seen, I decided to get some 6mm hdpe and make to shape patterns of there bases, glue them on, so it should give the fibre glass an easier time with the hdpe being soft enough to bend to the shape of the fibre glass.
The hdpe was good stuff to work with, will be making 2 bait lids out of the stuff for the bait wells I have either side at the back, originally with cruise craft I think they may have been timber, but one of the previous owners obviously removed them completely.
So off during the week getting some stainless screws and bolts and some hard wood for underneath support under the gunnels and the like and should have them all fitted next weekend,,,,,, may start looking like a boat a bit more by then...............

Col

Texas
Rank: Premium Member
Rank: Premium Member
Joined: Tue Jun 17, 2014 10:41 am
Location: Hoppers Crossing
Has liked: 221 times
Likes received: 460 times

Re: Getting on with boat re-build

Post by Texas » Sat Aug 11, 2018 4:22 pm

When your finished Col,
I want a 22ft half cabin, clinker style, with forward controls & desiel motor
Prefer wood, but will accept fibreglass
After next Thursday, money is no object (stwp)
Gra

blacklab99
Rank: Premium Member
Rank: Premium Member
Joined: Mon Mar 11, 2013 2:41 pm
Location: malvern east
Has liked: 14 times
Likes received: 73 times

Re: Getting on with boat re-build

Post by blacklab99 » Sat Aug 11, 2018 4:46 pm

Can I take you fishing in instead ! LOL
I must admit, as I gather everything and get it ready, it is very satisfying,
Mind, I'll be glad when I'm "project" free, and I can just go out and have a fish !!!
But something tells me, there's always something that needs to be fixed up.

hope all's well


Col

smile0784
Rank: Premium Member
Rank: Premium Member
Joined: Thu Apr 26, 2012 5:16 pm
Has liked: 39 times
Likes received: 356 times

Re: Getting on with boat re-build

Post by smile0784 » Sat Aug 11, 2018 7:38 pm

blacklab99 wrote:
IMG_0975.JPG
Got a bit of time in over the last few days, decided to leave the flow coating for a few weeks till weather warms up and concentrate on getting the
Rocket launcher, bait board and newly re furbed windscreen installed.
I wasn't happy with the stainless plates of the bait board and rocket launcher clamped straight down on the fibre glass, all the surfaces weren't totally flat and even though it's covered and not seen, I decided to get some 6mm hdpe and make to shape patterns of there bases, glue them on, so it should give the fibre glass an easier time with the hdpe being soft enough to bend to the shape of the fibre glass.
The hdpe was good stuff to work with, will be making 2 bait lids out of the stuff for the bait wells I have either side at the back, originally with cruise craft I think they may have been timber, but one of the previous owners obviously removed them completely.
So off during the week getting some stainless screws and bolts and some hard wood for underneath support under the gunnels and the like and should have them all fitted next weekend,,,,,, may start looking like a boat a bit more by then...............

Col
Great bait board.
Hopefully the boat will be perfect when completed

smile0784
Rank: Premium Member
Rank: Premium Member
Joined: Thu Apr 26, 2012 5:16 pm
Has liked: 39 times
Likes received: 356 times

Re: Getting on with boat re-build

Post by smile0784 » Sat Aug 11, 2018 7:40 pm

blacklab99 wrote:Can I take you fishing in instead ! LOL
I must admit, as I gather everything and get it ready, it is very satisfying,
Mind, I'll be glad when I'm "project" free, and I can just go out and have a fish !!!
But something tells me, there's always something that needs to be fixed up.

hope all's well


Col
By tue time you get this.all done the motor will be due for service or trailer needs.work lol.
Always something to do with a boat.
And if not theres always rod amd reel servicing amd making of sinkers.lol.

rb85
Rank: Premium Member
Rank: Premium Member
Joined: Thu Dec 08, 2016 8:08 pm
Location: The Ocean
Has liked: 412 times
Likes received: 609 times

Re: Getting on with boat re-build

Post by rb85 » Sat Aug 11, 2018 8:05 pm

Motor service after 0 running hours since project commencement?

rb85
Rank: Premium Member
Rank: Premium Member
Joined: Thu Dec 08, 2016 8:08 pm
Location: The Ocean
Has liked: 412 times
Likes received: 609 times

Re: Getting on with boat re-build

Post by rb85 » Sat Aug 11, 2018 8:06 pm

Look forward to seeing how the stainless looks on hull.

Post Reply

Return to “Boating”