How To Set-Up Garfish Rig Vid

Beno · Post by **Beno** » Mon Jul 23, 2012 4:25 pm

Hello Guys

Just a quick heads up on a new video I put together for anyone who is keen on learning how to set-up a garfish float rig.

http://www.youtube.com/watch?v=Ho_-Goxs ... ature=plcp

Cheers Beno :thumbsup:

georged2 · Post by **georged2** » Mon Jul 23, 2012 6:59 pm

Well done Beno, good effort and good on ya for sharing information.

Post by **CremeDeLaCreme** » Mon Jul 23, 2012 9:20 pm

Thanks Beno,

is there any reason you only use 1 hook instead of 2 like a paternoster style Gar rig?

Beno · Post by **Beno** » Mon Jul 23, 2012 9:49 pm

Thanks guys, I sometimes use double hooks but was showing it the easiest way possible for beginners. I also find it tangles more often with paternoster style.

Cheers Beno

elek1ng · Post by **elek1ng** » Wed Nov 14, 2012 3:15 am

Newbie here.
why three sinkers in a row?
sorry for the silly question...

Time Poor · Post by **Time Poor** » Wed Nov 14, 2012 7:23 am

Hi Beno,

I enjoyed your video, this is basically a standard coarse-fish set-up. A few questions/suggestions:

The small rubber rings to keep the float upright can be replaced with small shot either side of the float.

I have never seen anyone use so much pressure just to apply shot to mono, I simply use my fingers to pinch them on and rarely have any come off (it's easy to know as the float will sit higher). Do you ever re-use the shot or are they discarded? By using your fingers the shot will come off using either your thumb-nail or by inserting a knife into the slit. I doubt I'd be able to reuse the shot you've used in the film. This has the added bonus of being able to adjust fully your depth, even to within a few cm of the float.

I use the nail clippers that come in Christmas crackers or from the chemist instead of scissors - cheaper, smaller and can be tied to a jacket for ease of use.

Finally, surely the mono you've used there for gar is overkill? The most I've used for gar is 2lb bull, max 4lb if there are other species hanging around.

Many thanks.

Beno · Post by **Beno** » Fri Nov 16, 2012 2:43 pm

elek1ng wrote:Newbie here.
why three sinkers in a row?
sorry for the silly question...

Keeps the float at the right level. This can depend though on what type of float you are using you may have to use more or less shots....

Time poor, thanks glad you like the vid.

Now with the shots to mono question I just find its easier to crimp them on with pliers, I have had them come off numerous times when crimping on with fingers.... maybe I dont have a strong enough grip? lol.

I dont find 8 pound lo stretch platypus mono to be over kill, after all it has a thinner diameter than most monos. You have to remember I don't just use my rods just for gars but whiting and snapper too..... :victory:

Cheers Beno

elek1ng · Post by **elek1ng** » Mon Nov 19, 2012 12:32 am

Beno wrote:
elek1ng wrote:Newbie here.
why three sinkers in a row?
sorry for the silly question...
Keeps the float at the right level. This can depend though on what type of float you are using you may have to use more or less shots....

Cheers Beno

I see. So, if using one heavier sinker will do the same trick as well?
Anyway, thanks for your time and really like your attitude.

Beno · Post by **Beno** » Mon Nov 19, 2012 4:25 pm

Yep that will work, no worries.

elek1ng · Post by **elek1ng** » Thu Nov 22, 2012 3:54 pm

Thanks a lot. Hopefully this time will not heading home with empty basket.

Fishing Victoria Forum

How To Set-Up Garfish Rig Vid

How To Set-Up Garfish Rig Vid

Re: How To Set-Up Garfish Rig Vid

Re: How To Set-Up Garfish Rig Vid

Re: How To Set-Up Garfish Rig Vid

Re: How To Set-Up Garfish Rig Vid

Re: How To Set-Up Garfish Rig Vid

Re: How To Set-Up Garfish Rig Vid

Re: How To Set-Up Garfish Rig Vid

Re: How To Set-Up Garfish Rig Vid

Re: How To Set-Up Garfish Rig Vid