Getting on with boat re-build

blacklab99
Rank: Premium Member
Rank: Premium Member
Joined: Mon Mar 11, 2013 2:41 pm
Location: malvern east
Has liked: 14 times
Likes received: 73 times

Re: Getting on with boat re-build

Post by blacklab99 » Thu Jul 12, 2018 8:37 pm

Yeah, I'm kicking myself. but she was pissing down when I picked it up, jumped in to look at the floor and tank area, didn't peer in the engine well.
So kicking my self I never inspected closer. The transom is mirror finish, beautiful finish !
But yeah, p1ss poor bowl.
Anyways, the old saying, do it yourself, then there's no one to ***** at !
I'm picking my finish will be a damn site better than the pro's.......

Col

cobby
Rank: Murray Cod
Rank: Murray Cod
Joined: Tue Apr 16, 2013 5:39 pm
Has liked: 136 times
Likes received: 324 times

Re: Getting on with boat re-build

Post by cobby » Thu Jul 12, 2018 9:03 pm

200 wet/dry, 400 wet/dry, 800 wet/dry and MAYBE it'll save the time and expense of grinding it back and spraying before doing the whole rub down all over again.

blacklab99
Rank: Premium Member
Rank: Premium Member
Joined: Mon Mar 11, 2013 2:41 pm
Location: malvern east
Has liked: 14 times
Likes received: 73 times

Re: Getting on with boat re-build

Post by blacklab99 » Thu Jul 12, 2018 9:15 pm

cobby wrote:200 wet/dry, 400 wet/dry, 800 wet/dry and MAYBE it'll save the time and expense of grinding it back and spraying before doing the whole rub down all over again.
Exactly how i was going to tackle it cheers cobby......


col

rb85
Rank: Premium Member
Rank: Premium Member
Joined: Thu Dec 08, 2016 8:08 pm
Location: The Ocean
Has liked: 412 times
Likes received: 609 times

Re: Getting on with boat re-build

Post by rb85 » Thu Jul 12, 2018 9:26 pm

Bummer BL hopefully you can get onto of it.

blacklab99
Rank: Premium Member
Rank: Premium Member
Joined: Mon Mar 11, 2013 2:41 pm
Location: malvern east
Has liked: 14 times
Likes received: 73 times

Re: Getting on with boat re-build

Post by blacklab99 » Thu Jul 12, 2018 9:34 pm

rb85 wrote:Bummer BL hopefully you can get onto of it.

Always up for a challenge !
That job will wait for the minute, Old gunwale rubber almost off, big clean up on the weekend, then get to work on grinding out all the side shelf's, plenty to do, but I'm up for it ! famous last words :-D

Col

cobby
Rank: Murray Cod
Rank: Murray Cod
Joined: Tue Apr 16, 2013 5:39 pm
Has liked: 136 times
Likes received: 324 times

Re: Getting on with boat re-build

Post by cobby » Thu Jul 12, 2018 10:34 pm

The cutting and grinding out the old stuff, the layup of new glass is all fairly quick and easy (itchy though). It's the touch-ups, the rubbing back, the retouch-up, rub back, spray, touch up, rub back, final spray, rub back that's the worst

blacklab99
Rank: Premium Member
Rank: Premium Member
Joined: Mon Mar 11, 2013 2:41 pm
Location: malvern east
Has liked: 14 times
Likes received: 73 times

Re: Getting on with boat re-build

Post by blacklab99 » Fri Jul 13, 2018 6:47 pm

IMG_0947.JPG
IMG_0947.JPG
Ok, mucked that up, doubled up on one photo.
This is the top half being connected to the hull, interestingly, rivoted together. No doubt they use an epoxy between the join as well.
but it was interesting lookig at it once the gunnel was removed and all the epoxy mix was chizled off.
The old gunwale rubber, was basically cactus, it snapped and split as it was un screwed and pulled off, she was fair knackered.
getting the same prfile gunwale rubber is going to be an issue, most types dont have an infill strip, which gives you access to screw it all the way round
the boat, then slip the insert in to finish it, still searching for something close in style and dimensions......

Col
Attachments
IMG_0949.JPG

blacklab99
Rank: Premium Member
Rank: Premium Member
Joined: Mon Mar 11, 2013 2:41 pm
Location: malvern east
Has liked: 14 times
Likes received: 73 times

Re: Getting on with boat re-build

Post by blacklab99 » Sat Jul 14, 2018 4:41 pm

IMG_0955.JPG
Not a real exciting Pic, But, 5 hours today giving her an acid wash to get over spray, glue, other shite, I don't know what it was !
So it's relatively clean now.
Got into grinding all the internal shelf area's for the rest of the day, once I've finished it all off, i'll post up a Pic.
Step by step, she'll gradually get done !!


Col

Lightningx
Bluefin
Bluefin
Joined: Wed Oct 01, 2014 4:21 pm
Has liked: 72 times
Likes received: 976 times

Re: Getting on with boat re-build

Post by Lightningx » Sat Jul 14, 2018 5:32 pm

It’s getting there mate! Keep at it :thumbsup:

smile0784
Rank: Premium Member
Rank: Premium Member
Joined: Thu Apr 26, 2012 5:16 pm
Has liked: 39 times
Likes received: 356 times

Re: Getting on with boat re-build

Post by smile0784 » Sat Jul 14, 2018 5:42 pm

Getting there mate
Keep up the good work

Post Reply

Return to “Boating”