wire trace
-
- Rank: Bream
- Joined: Wed Nov 14, 2012 4:33 pm
wire trace
hi huys after being bitten off 3 times in 1 sesson I was using about 1 to 1.5 meters of wire. I was missing about 30 cm each time but what triped me out was all the nylon coat was shredded about another 30 cm above the bite off . the thing im wondering is now that I got some 400lb wire how long sould it be also fishing land base and boat on heavy spin gear
Last edited by complete-anglerz-12 on Thu Jun 05, 2014 8:25 pm, edited 2 times in total.
where is the calamari ............. don't worry they coming ........ they will come
- ducky
- Rank: Premium Member
- Joined: Thu Feb 28, 2013 5:17 pm
- Has liked: 22 times
- Likes received: 332 times
Re: wire trace
When you say bite offs are they biting through the wire itself? Or are you losing the whole wire trace.
Could be a myriad of things from poor knots. To not enough leader. You may need a shock leader of a heavier line then your main line. 100lb wire is pretty solid stuff for most sharks apart from big toothies
Could be a myriad of things from poor knots. To not enough leader. You may need a shock leader of a heavier line then your main line. 100lb wire is pretty solid stuff for most sharks apart from big toothies
- rixter
- Rank: Gummy Shark
- Joined: Tue Dec 04, 2012 1:20 am
- Location: North NSW
Re: wire trace
Must be big carp your fishing for ! :crazy: :lol:
Cheers , Rick.
Cheers , Rick.
Here Fishy Fishy
Patience Young Grasshopper.
Patience Young Grasshopper.
-
- Rank: Bream
- Joined: Wed Nov 14, 2012 4:33 pm
Re: wire trace
hahaha i like the funny guysrixter wrote:Must be big carp your fishing for ! :crazy: :lol:
Cheers , Rick.
where is the calamari ............. don't worry they coming ........ they will come
Re: wire trace
1 trick is if it's sharks that are biting u off, and you haven't got any structure around just back off the drag
Takes alot longer but it works most times
Takes alot longer but it works most times
-
- Rank: Bream
- Joined: Wed Nov 14, 2012 4:33 pm
Re: wire trace
bite of where on 1st run after some big head shakes after busting braid from tight drag I changed all my line from 80 lb to 50 to get a few more meters
where is the calamari ............. don't worry they coming ........ they will come
- rixter
- Rank: Gummy Shark
- Joined: Tue Dec 04, 2012 1:20 am
- Location: North NSW
Re: wire trace
Obviously big sharks by the sounds of it!. Downgrading your line sounded like a no no, sounds like you need a larger reel that will hold more thicker line, and upgrade the wire trace leader thickness as you mentioned.
If your fighting the fish within the drag limits of the reel and the fish, and can't tire it out ( keeps running on you ) or busting you off. Then you need a bigger reel and thicker line so you can apply more drag to tire out the fish.
On a personal note too , I would personally be using mono for the main line , not braid , to allow a bit of stretch / although this has it's 50/50 results , it can make a lot of difference stopping a lot of breakoffs due to having some stretch in the line , but also has the downfall in deep waters making it harder to feel a bite. Also the mono is more resistant to rubbing on reefs/rocks etc.
But...as with using braid and 'big' fish bottom fishing, unless I have a very heavy line (a lot more lb rating and nearly as thick as the mono ), then I get a lot off bustoffs due to no stretch/give in the line/braid. But as with sharks from my experience, they hook themselves pretty much, so mono I prefer.
Each to their own ways, just my 2 bob. .
Cheers , Rick.
If your fighting the fish within the drag limits of the reel and the fish, and can't tire it out ( keeps running on you ) or busting you off. Then you need a bigger reel and thicker line so you can apply more drag to tire out the fish.
On a personal note too , I would personally be using mono for the main line , not braid , to allow a bit of stretch / although this has it's 50/50 results , it can make a lot of difference stopping a lot of breakoffs due to having some stretch in the line , but also has the downfall in deep waters making it harder to feel a bite. Also the mono is more resistant to rubbing on reefs/rocks etc.
But...as with using braid and 'big' fish bottom fishing, unless I have a very heavy line (a lot more lb rating and nearly as thick as the mono ), then I get a lot off bustoffs due to no stretch/give in the line/braid. But as with sharks from my experience, they hook themselves pretty much, so mono I prefer.
Each to their own ways, just my 2 bob. .
Cheers , Rick.
Last edited by rixter on Thu Jun 05, 2014 9:03 pm, edited 1 time in total.
Here Fishy Fishy
Patience Young Grasshopper.
Patience Young Grasshopper.
- Brett
- Moderator
- Joined: Sat Mar 05, 2011 10:23 am
- Location: Mornington Peninsula
- Has liked: 138 times
- Likes received: 223 times
Re: wire trace
complete-anglerz-12 wrote:bite of where on 1st run after some big head shakes after busting braid from tight drag I changed all my line from 80 lb to 50 to get a few more meters
Sounds like a seal
-
- Rank: Snapper
- Joined: Sat Nov 19, 2011 2:34 pm