I use size 3.5 only and after lots of experimentation with different brands have settled on RUI’s jigs as being the best and most cost effective. I only use 1 jig outside RUI’s line and that’s the yamashita r08. I used to take 40 different jigs fishing. These days I settle for a range of about 6 high performers with backups. I lose very few now that I fish 20-25lb leaders
I fish fairly fast when squidding so I vary sink rates by using RUI’s chin weights. Mostly 5grams but up to 10grams fishing in 10m+. I have the chin weight on almost religiously unless I’m in 3.5m or less. They are also perfect for sleeper jigs on a fast drift.
3.5 will catch absolutely everything except those days where there’s 10-15cm hoods following jigs but not hitting. For this I’d recommend a 1.8 jig on a paternoster rig with a 1/2oz sinker to get it down to em and just keep fishing with the 3.5 to snag better squid. But honesty unless you are desperate for bait these are a complete waste of time.
Squid jig sizes
-
- Rank: Kingfish
- Joined: Thu Aug 08, 2013 5:08 pm
- Location: Bellarine peninsula
- Has liked: 333 times
- Likes received: 569 times
Re: Squid jig sizes
Cheers ducky I also use the chin weights they certainly help when the current / drift is a bit to quick. I am glad to hear someone else mostly uses 3.5 I thought I was a bit odd
-
- Rank: Premium Member
- Joined: Fri Jan 20, 2017 4:44 pm
- Has liked: 5 times
- Likes received: 114 times
Re: Squid jig sizes
Use the rattles at nightNude up wrote: ↑Sat Dec 07, 2019 11:20 amCheers fellas my go to colour is whiting mottled gold, reddy prawn colour then white, silver mullet colour if they fail there is about another 30 different ones to choose. I find my boat drifts fairly quickly so I tend to use the larger jigs to help me get down closer to the bottom. I can and do on occasions put the drogue chute out but it can get in the way.
I have purchased several of the yamashita jigs with rattles in but do not think they stand in the catching stakes.
-
- Rank: Premium Member
- Joined: Fri Jan 20, 2017 4:44 pm
- Has liked: 5 times
- Likes received: 114 times
Re: Squid jig sizes
Landbased for me 2.5 or 3.0 my best squid 40cm hood on the 2.5 .Example was fishing early saturday bagged out of the shimano 14t 3.0 went back at the same time sunday 3.o 14t not a hit changed over to the 14t in a 2.5 nine squid so size does matter
Re: Squid jig sizes
Most of my fishing is done LB (down Peninsula way) and my go to jig as of late has been the Haramitsu AR22 in size 3.0 for early morning fishing. When/if the fishing is finicky, I have a red cloth on red foiled Shimano Egixile 2.5 which I use but let it stay deeper for longer before giving it a few hard 'whips' to work the jig. I find sometimes working the jig and making it dart makes the difference in catching them landbased compared to the occasional 'lift and wind' technique.
- Andrews
- Rank: Premium Member
- Joined: Mon Oct 07, 2019 2:41 pm
- Location: Bellarine Peninsula
- Has liked: 268 times
- Likes received: 766 times
Re: Squid jig sizes
I think you're all right about using a smaller size and changing the movement when the squid are being picky.
I've noticed that sometimes using that smaller size compared to others around you can make all the difference. It's something that gets the squid curious and moves differently compared to the multiple other jigs in the water.
In my area which is shallow, weeded and has a high clarity, I have found that two whips works well. The first pops the jig clear of the weed and the second darts it freely before allowing a slow sink. The squid seem to strike over this certain patch of weed and I’ve adjusted to give more action and longer sink over that patch. All those small things you pick up on makes a difference sometimes.
I've noticed that sometimes using that smaller size compared to others around you can make all the difference. It's something that gets the squid curious and moves differently compared to the multiple other jigs in the water.
In my area which is shallow, weeded and has a high clarity, I have found that two whips works well. The first pops the jig clear of the weed and the second darts it freely before allowing a slow sink. The squid seem to strike over this certain patch of weed and I’ve adjusted to give more action and longer sink over that patch. All those small things you pick up on makes a difference sometimes.
-
- Rank: Flathead
- Joined: Wed May 04, 2011 11:19 am
- Has liked: 63 times
- Likes received: 40 times
Re: Squid jig sizes
I find myself using 3.5 almost exclusively now, even Land based I drill out a hole in the lead for a slower sink. Squid are ravenous and will hit jigs bigger then them (in general), I have experienced where size does matter off Mornington where swapping to a 1.8 mattered, but mostly Ive loaded with Rui's 3.5 because he has chin weights, so I can customise sink rates for the situation.