Smart craft/vessel view question
-
- Rank: Banjo
- Joined: Tue Aug 25, 2020 9:34 pm
- Has liked: 2 times
- Likes received: 1 time
Smart craft/vessel view question
Ok the second hand boat I have bought comes with only one smart craft tacho gauge (sc1000)
But it does not have the 2nd Smartcraft speedo gauge.
This bugs me bcz I like to look at a gauge with speed. What is best option to set up a Speedo gauge bcz Merc dealer tells me it will cost another $1000 to install the smart craft speedo gauge.
Is vessel view the answer ? BTW is a 2016 Mercury 60 hp 4 stroke
But it does not have the 2nd Smartcraft speedo gauge.
This bugs me bcz I like to look at a gauge with speed. What is best option to set up a Speedo gauge bcz Merc dealer tells me it will cost another $1000 to install the smart craft speedo gauge.
Is vessel view the answer ? BTW is a 2016 Mercury 60 hp 4 stroke
-
- Rank: Premium Member
- Joined: Tue Jun 17, 2014 10:41 am
- Location: Hoppers Crossing
- Has liked: 221 times
- Likes received: 460 times
Re: Smart craft/vessel view question
Some people put GPS's in their cars that register speed
Might help, don't know
Gra
Might help, don't know
Gra
-
- Rank: Murray Cod
- Joined: Tue Apr 16, 2013 5:39 pm
- Has liked: 136 times
- Likes received: 324 times
Re: Smart craft/vessel view question
Your dealer ain't gouging, sc1000 gauges are ******* expensive. But here's the kicker, getting another sc1000 installed will be cheaper than changing over to either a Vessel View 403 (over $1500 on its own without install) or Vessel View Link (works only with Navico products Simrad and Lowrance and is $1100). Plus any additional nmea2000 parts needed to integrate it. It depends on how much info you want displayed and how "neat" you want it with either a single small screen, using only your current sounder/MFD or having the 2 small sc1000 gauges. And how much you're willing to empty the wallet toGrasshopper67 wrote: ↑Sun Sep 27, 2020 11:22 pmOk the second hand boat I have bought comes with only one smart craft tacho gauge (sc1000)
But it does not have the 2nd Smartcraft speedo gauge.
This bugs me bcz I like to look at a gauge with speed. What is best option to set up a Speedo gauge bcz Merc dealer tells me it will cost another $1000 to install the smart craft speedo gauge.
Is vessel view the answer ? BTW is a 2016 Mercury 60 hp 4 stroke
-
- Rank: Banjo
- Joined: Tue Aug 25, 2020 9:34 pm
- Has liked: 2 times
- Likes received: 1 time
Re: Smart craft/vessel view question
They just get you ! I have a Lowrance Chirp 5 hook sounder/GPS combo so can speed be measured on my Lowrance ?
-
- Rank: Premium Member
- Joined: Thu Dec 08, 2011 1:59 pm
- Has liked: 567 times
- Likes received: 1011 times
Re: Smart craft/vessel view question
yes its called SOG (speed on ground) you can change it t read in knots, km/hr etc.. and your current unit will have it on the top left hand side of the screen in GPS mode..Grasshopper67 wrote: ↑Mon Sep 28, 2020 7:53 amThey just get you ! I have a Lowrance Chirp 5 hook sounder/GPS combo so can speed be measured on my Lowrance ?
if you had a Elite ti or higher spec unit, you can then connect to your engine (if compatible) and have a readout of pretty much every engine parameter you need info on.
look into it, only if you want to upgrade your sounder gps unit, otherwise its not worth the hassle. however it may be cheaper than a smart craft unit.
cheers
-
- Rank: Banjo
- Joined: Tue Aug 25, 2020 9:34 pm
- Has liked: 2 times
- Likes received: 1 time
- Kestrel
- Rank: Premium Member
- Joined: Fri Oct 02, 2015 4:15 pm
- Has liked: 6 times
- Likes received: 27 times
Re: Smart craft/vessel view question
Have you considered VesselView Mobile? You buy a Bluetooth device (about $400) download the app (free) on your phone or tablet and you are good to go! Simple to setup too.
I have one and it works well
Cheers
Kestrel
I have one and it works well
Cheers
Kestrel
-
- Rank: Banjo
- Joined: Tue Aug 25, 2020 9:34 pm
- Has liked: 2 times
- Likes received: 1 time
Re: Smart craft/vessel view question
Yes I read about that too and it’s preferable to buying a smart craft gauge ! Thanks really helpful !
-
- Rank: Cephalopod
- Joined: Wed Sep 21, 2016 8:28 am
- Has liked: 11 times
- Likes received: 24 times
Re: Smart craft/vessel view question
only just saw this now,
the 60 Mercury EFI doesnt really support the speedo and its extra uses. Really you only need the tacho for those motors anyway. All the good information is in the tacho
the 60 Mercury EFI doesnt really support the speedo and its extra uses. Really you only need the tacho for those motors anyway. All the good information is in the tacho
-
- Rank: Banjo
- Joined: Tue Aug 25, 2020 9:34 pm
- Has liked: 2 times
- Likes received: 1 time