Suggestions for minor fiberglass hull repair

[HerbMac]

Hi The fiberglass hull centerline has a chip taken out by the anchor not being completely wound in .
The chip is roughly 1 cm square. Research on google says " epoxy fairing compound is best for repairs below the waterline because epoxy is 100% waterproof when cured, unlike polyester and vinyl ester resins."
I wish to do the repair myself but I'm having difficulty finding a suitable product. Would appreciate suggestions on product to use and where to buy, THANKS in advance.

[frozenpod]

Sounds like you only need gelcoat repair.

I have used septone before with great success.

https://www.whitworths.com.au/septone-g ... putty-400g

https://www.whitworths.com.au/gelcoat-r ... utty-500ml

[HerbMac]

Thanks frozenpod also received some suggestions from my local fishing club so I'm on track now. Cheers